Carbide saw tips
Our saw tips include F series, US Standard and European Standard. All saw tips are HIP-Sintered, to make sure high quality, with automatic pressing to make sure accurate size, tumble and nickel covered to make sure good brazing performance.
Our production quantity of saw tips is 200 tons annually, for regular orders, delivery time is within 10 days.
We have strict quality control system, with complete test equipments for hardness, strength, grain size, etc. We inspect each lot of saw tips, and reject any unqualified products.
Our brand has gain reputation from clients in Europe, USA, Asia, etc.
Our grades covers all ISO range, suitable for cutting grass, hard wood, soft wood, wood with steel nails, metal, plastic, PVC, MDF, Melamine board, plywood, etc.
Grade Density Hardness Strength Grain size ISO range Application
YG6 14.85-15.05 >90.5 >1860 Medium K20 ordinary wood
YG8 14.60-14.85 >89.7 >2060 Medium K30 ordinary wood and aluminum
YK08 14.50-14.80 >88.0 >2060 Coarse K40 recycling wood
JX5 14.65-14.85 >90.0 >2060 Medium K20 hard wood, recycling wood and aluminum
YG6X 14.70-14.85 >91.7 >1860 Fine K10 wood specially
YG8X 14.60-14.85 >91.0 >2000 Fine K10 wood and aluminum specially
K10S 14.70-14.85 >91.7 >3000 Fine K10 hard wood specially
K20S 14.60-14.80 >91.0 >3000 Fine K20 aluminum specially
K10UF 14.70-14.95 >93.0 >3000 microfine K05 hardwood, MDF, HDF board, compound materials with aluminum and plastic
K20UF 14.50-14.80 >92.0 >3000 microfine K10 aluminum specially
K30UF 14.25-14.55 >91.0 >3050 microfine K10 stone specially
YC40 12.80-13.30 >89.5 >1700 Medium P40 large metallurgic cast materials
YC501 12.70-13.30 >90.50 >1680 Medium M30 steel and stainless steel
| ||Application recommended|
|K20||For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high|
|K30||For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high|
|K40||For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high|
|K10||For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding|
|K10UF||For the cutting of the plywood,board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding|
|K20UF||For the cutting of the aluminum specially, Use the high frequency welding|
|K30UF||For the cutting of the stones specially, Use the high fre|